HomeStore

FEULING OIL PUMP CORP. Camchest Kit with Short Travel Lifters - Race Series® - Reaper 508 - Oil Cooled - M8

Product image 1

FEULING OIL PUMP CORP. Camchest Kit with Short Travel Lifters - Race Series® - Reaper 508 - Oil Cooled - M8

FEULING OIL PUMP CORP. Camchest Kit with Short Travel Lifters - Race Series® - Reaper 508 - Oil Cooled - M8

Camchest Kit with Short Travel Lifters - Race Series® - Reaper 508 - Oil Cooled - M8

  • Billet 7075 aluminum oil pump, which is 50% harder and stronger than the factory pump, holding tighter tolerances under temperature
  • Short travel hydraulic lifters have 0.115" of total travel and will increase rpm by decreasing valve float and valve-train harmonics while maintaining a quiet engine
  • Deeper scavenge kidney ports over the HP+ series for even more scavenge flow volume
  • 30% more pressure gear volume over stock for M-Eight Twin-Cooled motors
  • 53% more scavenge gear volume over stock for M-Eight Twin-Cooled motors
  • 27% more pressure and scavenge gear volume over stock for M-Eight Oil-Cooled motors
  • 42% more scavenge volume with port sizing, matched passages and holes to the engine case for M-Eight Twin-Cooled motors and M-Eight Oil-Cooled motors
  • 68% more oil volume to the crankshaft and connecting rod bearing for M-Eight Twin-Cooled™ motors and M-Eight Oil-Cooled motors
  • 15°-25° cooler engine temperatures for M-Eight Twin-Cooled™ motors and M-Eight Oil-Cooled motors
  • 15°-30° cooler oil temperatures for M-Eight Twin-Cooled™ motors and M-Eight Oil-Cooled motors
  • 10-30 more psi of oil pressure for M-Eight Twin-Cooled™ motors and M-Eight Oil-Cooled motors
  • Increases oil pressure, scavenge volume and engine oil flow
  • Reduces wet sumping, blowby and oily air cleaners
  • Magnets in oil pump to help protect gears and pressure relief valve
  • Test results show 2 hp gain and 2 ft/lb of TQ gain to the rear wheel on M-Eight
  • Feuling test results show a 50% reduction of engine sump oil level
  • Kit includes: Race Series® high volume oil pump, High Flow billet camplate, Reaper® Series camshaft, Race Series® short hydraulic roller lifters, one piece pushrods, Timken®/ Koyo® cam bearings, rocker arm studs/ nuts, gaskets, O-rings, ARP® cam/ crank fasteners, washers, moly paste and Loctite®
  • Made in the USA
Note:
  • Requires high lift valve springs.
  • Not for '23-'24 models with 121" VVT motor.

Includes:

  • • Race Series® High Volume Oil Pump
  • • High Flow Billet Camplate
  • • Reaper Series® 508 Camshaft
  • • Race Series® Short Travel Lifters
  • • One Piece Pushrods
  • • Timken/Koyo Cam Bearing
  • • Rocker Arm Studs and Nuts
  • • Gaskets
  • • O-Rings
  • • ARP Cam/Crank Fasteners
  • • Washers
  • • Moly Lube
  • • Loctite

CALIFORNIA WARNING: NOT LEGAL FOR SALE OR USE IN CALIFORNIA ON ANY POLLUTION CONTROLLED MOTOR VEHICLE. Not legal for sale or use on any EPA pollution controlled motor vehicle.

$620.98

Original: $2,069.95

-70%
FEULING OIL PUMP CORP. Camchest Kit with Short Travel Lifters - Race Series® - Reaper 508 - Oil Cooled - M8

$2,069.95

$620.98

Product Information

Shipping & Returns

Description

Camchest Kit with Short Travel Lifters - Race Series® - Reaper 508 - Oil Cooled - M8

  • Billet 7075 aluminum oil pump, which is 50% harder and stronger than the factory pump, holding tighter tolerances under temperature
  • Short travel hydraulic lifters have 0.115" of total travel and will increase rpm by decreasing valve float and valve-train harmonics while maintaining a quiet engine
  • Deeper scavenge kidney ports over the HP+ series for even more scavenge flow volume
  • 30% more pressure gear volume over stock for M-Eight Twin-Cooled motors
  • 53% more scavenge gear volume over stock for M-Eight Twin-Cooled motors
  • 27% more pressure and scavenge gear volume over stock for M-Eight Oil-Cooled motors
  • 42% more scavenge volume with port sizing, matched passages and holes to the engine case for M-Eight Twin-Cooled motors and M-Eight Oil-Cooled motors
  • 68% more oil volume to the crankshaft and connecting rod bearing for M-Eight Twin-Cooled™ motors and M-Eight Oil-Cooled motors
  • 15°-25° cooler engine temperatures for M-Eight Twin-Cooled™ motors and M-Eight Oil-Cooled motors
  • 15°-30° cooler oil temperatures for M-Eight Twin-Cooled™ motors and M-Eight Oil-Cooled motors
  • 10-30 more psi of oil pressure for M-Eight Twin-Cooled™ motors and M-Eight Oil-Cooled motors
  • Increases oil pressure, scavenge volume and engine oil flow
  • Reduces wet sumping, blowby and oily air cleaners
  • Magnets in oil pump to help protect gears and pressure relief valve
  • Test results show 2 hp gain and 2 ft/lb of TQ gain to the rear wheel on M-Eight
  • Feuling test results show a 50% reduction of engine sump oil level
  • Kit includes: Race Series® high volume oil pump, High Flow billet camplate, Reaper® Series camshaft, Race Series® short hydraulic roller lifters, one piece pushrods, Timken®/ Koyo® cam bearings, rocker arm studs/ nuts, gaskets, O-rings, ARP® cam/ crank fasteners, washers, moly paste and Loctite®
  • Made in the USA
Note:
  • Requires high lift valve springs.
  • Not for '23-'24 models with 121" VVT motor.

Includes:

  • • Race Series® High Volume Oil Pump
  • • High Flow Billet Camplate
  • • Reaper Series® 508 Camshaft
  • • Race Series® Short Travel Lifters
  • • One Piece Pushrods
  • • Timken/Koyo Cam Bearing
  • • Rocker Arm Studs and Nuts
  • • Gaskets
  • • O-Rings
  • • ARP Cam/Crank Fasteners
  • • Washers
  • • Moly Lube
  • • Loctite

CALIFORNIA WARNING: NOT LEGAL FOR SALE OR USE IN CALIFORNIA ON ANY POLLUTION CONTROLLED MOTOR VEHICLE. Not legal for sale or use on any EPA pollution controlled motor vehicle.

FEULING OIL PUMP CORP. Camchest Kit with Short Travel Lifters - Race Series® - Reaper 508 - Oil Cooled - M8 | Lifestyle Cycles